Tunze Turbelle Nanostream 6055


Out of stock

SKU: 6014 Category: Tags: , Product ID: 4321


What is it that makes the Turbelle® propeller pump so special?

Very silent operation
Special synthetic or magnetic bearings and the Silence holder included as standard enable very silent operation.
Flexible 3D adjustment
Unlike other pumps, the Turbelle® provides important flexibility regarding positioning and direction of the water jet. The water jet can be directed in such a way that a long distance in the aquarium is covered, producing an efficient current at low power consumption.
Large intake surface
The big intake strainer prevents early soiling and protects the animals against being sucked in.
High-performance motors with eco-energetic concept offer very high efficiency at very low maintenance requirements and power consumption.
Controllable performance
The safety extra low voltage, electronic speed-control Turbelle® is ideal for use in any aquarium with wave or high/low tide simulation.

Flow rate: 1,000 to about 5,500l/h
with Turbelle® Controller
Energy consumption: 4 – 18W
Power supply unit: 100-240V / 50-60Hz
Cable length: 5m
Dimensions: diam. 70mm
Output: diam. 40/15mm
Magnet Holder with Silence clamp up to a glass thickness of 15mm



Turbelle® nanostream® electronic 6055 and 6095 are speed-controlled pumps with a Turbelle® controller operating on safety extra-low voltage, to be employed ideally in every aquarium from 40 to >1,000 liters  for simulation of lapping waves or tidal currents. They contain a new microprocessor-controlled motor and a Turbelle® controller. The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds. The pump driver has been provided with a fish care function, which causes a revolution of the propeller every twenty seconds when the pump is at a standstill.


The Turbelle® controller is a device that is used to set the variable pump performance. It can provide a wave simulation, oscillation flow, an automatic search for the resonance frequency when the oscillation flow is used, and it is also equipped with a food timer.