Turbelle® nanostream® electronic is a speed-controlled pump operating on safety extra-low voltage, to be employed ideally in every aquarium from 40 to > 1,000 litres for simulation of lapping waves or tidal currents. It contains a new microprocessor-controlled motor and thus can be called an “intelligent pump”: The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about fifty per cent lower than in conventional pump motors. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds. The pump driver has been provided with a fish care function, which causes a revolution of the propeller every twenty seconds when the pump is at a standstill.
It can be controlled by Multicontroller 7095, 7096 as well as Wavecontroller 7092.
for aquariums from 100 to 1000 litres
Flow rate: 2,000 to about 9,500l/h
with Turbelle® Controller
Energy consumption: 5 – 21W
Power supply unit: 100-240V / 50-60Hz
Cable length: 5m
Dimensions: diam. 70mm
Output: diam. 50/10mm
Magnet Holder with Silence clamp up to a glass thickness of 15mm